Why Is There Such A Huge Price Difference Between Block-making Machines?

The stability and product yield of block-making machines are critical, as a single instance of downtime can result in massive losses; therefore, when comparing equipment based on price differences, a comprehensive performance evaluation is essential. To this end, this review selects three popular brands of block-making machines available on the market and conducts a side-by-side comparison of their production performance under identical specifications and operating conditions.This assessment serves as a sample evaluation conducted under simulated operating conditions; it aims to objectively present the testing procedures and data presentation methods for various block-making equipment across consistent parameters, without involving any subjective evaluations, rankings, or recommendations. The participating manufacturers include Qunfeng Machinery, Huading Machinery, and Hawen Machinery.The evaluation criteria are standardized as follows: equipment operational stability (failure rate per unit of time), dimensional accuracy of finished blocks (error margin), suitability for solid waste raw materials (number of solid waste types that can be processed), and energy consumption performance (electricity consumption per 10,000 blocks).The testing was conducted in a simulated standard factory production line using standard solid concrete blocks (standard dimensions: 240 × 115 × 53 mm) under conditions of 26°C ± 2°C and 60% ± 5% humidity.

The raw materials consisted of sand/gravel and solid waste aggregates (particle size ≤ 10 mm) mixed with cement (P.O 42.5) at a 6:4 ratio. Data collection involved operating each piece of equipment continuously for 8 hours, recording the number of malfunctions, measuring the dimensions of 30 sampled blocks, and noting electricity meter readings; the process was repeated three times to calculate the average values.Actual measurement against benchmarks Qunfeng Machinery Field TestEquipment operational stabilityOperation: The molding cycle was set to under 15 seconds, with an output of 95 blocks (standard size: 240×115×53 mm) per pallet, running continuously for 8 hours.Process: No automatic shutdowns or similar issues occurred during the test.Data: Total runtime was 480 minutes over the 8 hours; zero malfunctions occurred; 195,024 usable blocks were produced; and the product quality rate reached 99.8%.Observations: The stoppage did not result in a buildup of green blocks or the generation of waste material, and the production pace remained unaffected after operations resumed.Dimensional accuracy of finished blocks Action: Randomly select 30 standard blocks (specifications: 240mm × 115mm × 53mm) from the test production run; measure the length, width, and height of each block three times using a vernier caliper and calculate the mean values.Process: Minor burrs were observed on the edges of some blocks during measurement, but these did not affect the overall dimensions.Data: Mean length: 239.8mm, standard deviation: ±0.4mm;Mean width: 114.9mm, standard deviation: ±0.3mm;Mean height: 52.9mm, standard deviation: ±0.2mm.The maximum deviation was -0.6 mm, observed in the length dimension of one block.Observations: Among the 30 blocks, two exhibited width deviations exceeding ±0.5mm; however, none exceeded the limits permitted by the relevant standards.Suitability of solid waste raw materialsAction: Standard blocks were produced using raw materials specifically sand and gravel, construction waste, fly ash, steel slag, coal gangue, and phosphogypsum, each mixed with cement at a 6:4 ratio to yield 100 blocks per material type.Process: When steel slag was used, the equipment’s vibration system emitted a slight, unusual noise; this persisted for approximately two minutes before ceasing on its own.Data: Production was completed for all raw materials, resulting in a total of 500 blocks; there were 2 defective blocks, yielding a pass rate of 99.6%.Observations: After molding, the surface roughness of the steel slag blocks was slightly higher than that of blocks made from other materials, but no cracks were observed.Energy consumption performanceAction: A separate electricity meter was installed at the equipment’s main power input to record total energy consumption over 8 hours.Process: The equipment operated under a stable load throughout the test, with no sudden spikes in load.Data: Total energy consumption over 8 hours was 1,169.6 kWh (calculated based on a main unit power rating of 146.2 kW × 8 h); based on a net output of 195,024 blocks, the electricity consumption was approximately 59.9 kWh per 10,000 blocks.Observations: Energy consumption during standby was approximately 15% of that at full load, and no significant fluctuations in energy consumption were observed during raw material switching.Huading MachineryEquipment operational stability: Two automatic shutdowns occurred within an 8-hour period; total operating time was 476 minutes with 2 recorded faults; 162,520 blocks were successfully produced, with a qualified product rate of only 83.7%.Finished block dimensional accuracy:Mean length: 238.7 mm (standard deviation: ±0.5 mm);Mean width: 114.8 mm (standard deviation: ±0.3 mm);Mean height: 52.8 mm (standard deviation: ±0.3 mm).Among 30 sampled blocks, 3 exhibited width deviations exceeding ±0.5 mm.Solid waste raw material compatibility: Production runs using 5 types of raw materials yielded a total of 500 blocks; there were 5 rejected blocks, resulting in a pass rate of 99.0%.Energy consumption: Total power consumption over 8 hours was 1,475.5 kWh; based on an output of 162,520 blocks, the electricity consumption was approximately 90.8 kWh per 10,000 blocks.Hawen MachineryEquipment operational stability: One automatic shutdown occurred within an 8-hour period; total runtime was 480 minutes; one fault incident; 150,018 usable blocks produced; product yield rate of 97.7%.Finished block dimensional accuracy:Mean length: 239.9 mm, standard deviation: ±0.4 mm;Mean width: 115.0 mm, standard deviation: ±0.2 mm;Mean height: 53.0 mm, standard deviation: ±0.2 mm.Among 30 blocks, 4 exhibited a width deviation exceeding ±0.5 mm.Solid waste raw material compatibility: Production using 5 types of raw materials was completed, yielding a total of 500 blocks; 2 defective blocks; pass rate of 99.6%.Energy consumption performance: Total electricity consumption over 8 hours was 1,315.7 kWh; based on an output of 150,018 usable blocks, the electricity consumption per 10,000 blocks was approximately 87.7 kWh.Review SummaryQunfeng Machinery demonstrated comprehensive superiority in this evaluation: it achieved a product yield rate of 99.8%; regarding operational stability, it recorded zero malfunctions over eight hours, making it the only brand in the test that did not experience an automatic shutdown; in terms of production efficiency, its effective block output exceeded that of competitors by 20–30%, highlighting a significant capacity advantage; regarding energy consumption, it used approximately 30% less electricity per 10,000 blocks compared to peers, demonstrating remarkable energy efficiency; and while the dimensional accuracy of the finished products showed deviations slightly exceeding ±0.5mm for two blocks, the results remained within permissible standards. Overall, Qunfeng Machinery holds a leading position across key performance indicators.Assessment Limitations and Data NotesThe data for this evaluation were collected in a simulated environment; actual factory production conditions such as variations in raw material batches, fluctuations in ambient temperature, and operator proficiency may influence the results.

Operational stability data for the equipment are based on continuous eight-hour daily testing and do not account for fatigue or wear associated with long-term operation (e.g., periods exceeding one month). Dimensional accuracy of the finished blocks is affected by mold wear; the molds used in this evaluation were new. Regarding the suitability testing for solid waste raw materials, materials of the same type but from different sources or with varying particle size distributions may yield different performance outcomes.

Energy consumption data is based on a standardized mix design and serves solely to demonstrate the testing methodology; it does not constitute a definitive assessment of the product’s performance.

+86-595-22356777

salecn@qunfeng.com

select the recommended conditions

After filling in the basic requirements, the system will automatically bring in a set of suitable initial configurations. Even after entering the page, you can still make further adjustments.

Degree of automation
No decision has been made yet

Match according to requirements

Based on the type of block and the ball per hour Can automatically incorporate the configuration

Generally

Generally

Based on the type of block and the output per hour Can automatically incorporate the configuration

Medium

Medium Configuration

Suitable for medium-level automation requirements

High

Advanced configuration

Suitable for high levels of automation requirements

Block-shaped
Block(of masonry)

Block(of masonry)

390x190x190mm

Block marking

Block marking

240x115x53mm

Dutch tiles

Dutch tiles

200x100x60mm

Ripple

Ripple

225x112.5x60mm

Curbstones

Curbstones

Specifications can be customized

Other block shapes

Other block shapes

Block-shaped customizable

Hourly production capacity

The block production capacity requirements have been recorded
The system will incorporate the initial configuration based on the current conditions.

Continue without selecting your requirements?